Skip to main content

Start Your First Lock

This guide walks you through a first self-lock session. You can explore shared locks later if you want a keyholder involved.

Start a Self-Lock​

Open Start self lock and give the session a title. You can use:

  • A combination lockbox, safe, or padlocked container, with its code stored as a photo or generated digits.
  • A supported QIUI or Lockink device that you have already configured in Chastify.

For a first run, enable Test lock under Safety & Emergency Features and leave your physical box or device unlocked. Test locks keep emergency release enabled and do not start automatic locked-time or streak tracking.

You cannot start another self-lock while you already have an active lock session. The setup screen also shows your available module allowance; reduce enabled modules if you exceed it.

Time Based or Card Based​

For a timer lock, choose one of these starting points:

  • Initial Duration: a fixed amount of time from the session's start.
  • Random Duration Mode: choose a minimum and maximum for the initial random duration.
  • Set a release date: choose a date and time instead of a duration. This option is available for timer locks.

The random-duration maximum is not automatically the session's safety limit. Games, penalties, and other actions may add time after the lock starts.

Under Safety Limits, enable Limit lock time (cannot exceed maximum) and set Maximum Duration if you want a final time cap. For example, you could start with 30 minutes and separately cap the session at 1 hour. The safety deadline applies to timer and card-game locks.

Timer locks can also use Minimum time locked. This prevents time reductions from bringing the release date below the configured duration measured from your session's start, and cannot be changed after the session starts. Set it to zero to disable it. See Minimum Time Enforced for a seven-day example and how it interacts with other release conditions.

For a card-game lock, ordinary timer expiry does not release you. Release normally depends on drawing the required green cards; an enabled maximum-time limit or emergency release provides a separate ending. See Card Game for card types and drawing rules.

Even for timer locks, zero remaining time may not be enough: configured task points, votes, extension requirements, or other unlock conditions can still apply. See Unlock Your Lock.

Lock Options​

Review the options before starting, especially settings that cannot be reversed during an active session:

  • Emergency release: ends the session early so you can reveal your combination or complete the device-unlock flow. Enable it before a first real session.
  • Soft emergency release: temporarily unlocks without ending the session, then lets you re-lock with timers and settings preserved. It is disabled by default and has its own allowance of 1–5 uses or Unlimited. Its switch is independent of permanent emergency release.
  • Hygienic unlock: gives temporary access followed by relocking. Availability can be based on a use count, an interval, or a schedule. The break duration, timer-freeze option, and late-relock penalty are configurable; 30 minutes is the default break duration, not a fixed limit for every lock.
  • Self-lockee mode: prevents transferring the self-lock to a human keyholder, AI, or bot coach after it starts. AI/bot chat requirements are unavailable in this mode. Enabling it during a session also removes any existing AI/bot chat requirement; see disabling keyholder transfer.
  • Hardcore Mode: an account setting that prevents archiving an active lock and restricts some changes after start. It cannot be disabled while your lock is active.

For hygienic unlock, check the displayed return deadline and complete the relock flow before it expires. A temporary break does not end the session. See Hygienic Unlock for schedules, penalties, and step-by-step relocking.

Extensions​

Enable only the modules and extensions you want, then open their configuration before starting. They may add time, change the card deck, assign tasks, or add unlock requirements. The setup screen counts enabled modules against your account's allowance.

For a first test, start with a simple timer and add features once you understand the basic start and unlock flows.

Lock Combination​

Under Choose Your Unlock Method, select a combination photo, a generated code, or Physical Device.

The physical-device option appears when you have a configured, active device and no current lock session. Choose Start Device Lock and follow its confirmation flow. Normal device controls are subject to the active session's restrictions; approved hygienic or emergency release has its own flow.

Check Supported Devices for pairing, connection requirements, supported commands, and device-specific limitations before starting a device lock.

Combination Photo Flow​

  1. Keep the lockbox open or otherwise accessible while preparing the session.
  2. Set the combination and take a clear photo with every code wheel visible and centered. If you want to avoid learning the code, take the photo without reading the digits.
  3. Select the photo in the unlock-method section.
  4. Choose Upload & Start Lock. If a Photo readability check appears, review its result and either change the photo or confirm the start.
  5. Wait for the Session started confirmation and check that the lock appears on your dashboard.
  6. Only then close the box with the key inside and scramble its wheels. Only remove your local photo after confirming that the session started successfully.
Important Before Closing the Safe

Selecting a photo does not save a started lock. Until the start succeeds, the selected image may exist only in your browser or app. If upload or session creation fails, keep the box accessible and resolve the error before closing it.

Photo readability check

When enabled and available to your Supporter account, an automated check can assess whether the photo's wheels are visible, centered, and readable without displaying the code. Set Digit length to match the number of wheels. The check can be unavailable or inconclusive, and is not a guarantee that the combination will work. Use Change photo or Back if the image is unclear.

Generate a Combination​

  1. Select the generated-code option and set Digit length to match your lockbox. Chastify supports 3–12 digits.
  2. Set the displayed code on your box while it remains open and check that it works. If you use Regenerate, update the physical box to the new code too.
  3. Choose Start Scramble. The scrambler displays random digits to help you forget the code.
  4. At the end of the scrambler, choose Start lock to submit the session. The scramble animation alone does not start it.
  5. Wait for the success confirmation and dashboard, then close the box and scramble its wheels.

The combination becomes available through the unlock flow when the session's release conditions are met. Do not rely on the scrambler to guarantee that you forget the code.

Archiving or Deleting Before Unlock

Reveal your combination and open the physical lockbox before removing the session. Archiving an active lock as the wearer hides its generated combination from you, and removing a photo-based lock can delete its combination image. Archiving is not a replacement for the unlock flow.

QIUI / Lockink Device Note

Device locks use their own unlock controls rather than a stored combination photo. Follow the device's unlock and completion prompts when release becomes available. Hardcore Mode prevents the wearer from archiving an active session; review that setting before starting.

Emergency Release and Digital Keys​

Enable Emergency release before starting if you want a built-in way to end the session early. Test locks keep it enabled automatically. Activating it ends the session; you then reveal the code or photo, or unlock your connected device.

Soft emergency release is a separate option for temporary access. It keeps the session active, does not pause timers, and has no re-lock deadline or late-return penalty. In lock details, both options use the same Emergency Release dialog: when both are available, choose temporary access or a permanent ending. See Emergency Release for limits, reasons, notifications, and re-locking.

If ordinary emergency release is disabled, Emergency Release Keys can provide a paid release only when paid keys are allowed for your account and that lock.

  • No paid key is consumed when ordinary emergency release is enabled or the session is a test lock.
  • When paid keys are needed, the requirement is 1–10 keys. Check the release screen for the required quantity, available balance, and current purchase price.
  • During an active session, the wearer can increase the key requirement but cannot decrease it.
  • Global settings can disable paid keys for future locks. Use Save Global Settings before starting; these settings cannot be changed while you have an active lock.
  • The wearer can also disable paid keys for the remainder of an active self-lock. That cannot be reversed for the same session.

If both ordinary emergency release and paid keys are disabled, do not assume you can buy a permanent release later. An enabled soft release provides temporary access and does not end the session. Review these settings before starting. For a technical problem, see Contacting Support.

For shared-template options such as Trap Mode, continue with Create a Shared Lock. For the normal release process, see Unlock Your Lock.